• MK5 Edition 30 #57 Track/Race Build, Massive Gearbox Update!

    Moving on from the Mk2, still with the bug to get out on a track, I think it was inevitable I would end up with another VW. I looked at a few options but to be honest, I don't know anything else other than Volkswagen. An Elise or Exige may have crossed my auto trader search but not for long, I always ended up back at the MK5 Golf's or Scirocco's. The Scirocco was a hard one to choose as it's less supported in the market, Although the same chassis as the MK5 it just didn't feel right so it had to be a MK5.
    I went to look at a "standard" GTI in Wales, A red 3 door manual with 68000 on the clock. The only modifications I could see in the pictures were 2 red VW badges but at 68000 it had to be looked at. It was in a ford dealer so I went up on a Saturday. The car was in very good condition but not standard on the engine front by any means. Lots of metal pipes and a massive halfords cone filter. It drove well though so I made a cheeky offer but we could not agree on price so I walked away. In hindsight I'm glad I did walk away.

    I then went to look at one near Bath, A red 3 door manual with...err I cant remember how many miles on the clock but it was an edition 30 base car. It was already heavily modified into a track car, Running about 500 BHP! It was close to me so I had a look, Sadly it was not what I was after and decided I needed to build one myself

    A few weeks passed keeping my eye on all the usual spots. I had decided on an Edition 30 due to the better TFSI engine and it's potential so this narrowed the search as only about 2500 were produced.
    One cropped up in wales again, Not a million miles so it was worth a look. It was a...Yes you guess it, Red 3 door manual with 94k on the clock. The price was not bad so I went over on a Saturday. The car was dirty as there was a building site next to the dealer but other than that it looked quite clean. I took it for a test and it went really well. The interior is in excellent condition for 94000 miles. We haggled on price and I managed to get a good price with me taking the car away there and then. A few phone calls to Admiral and I took it away! The drive home was good, No problems and it went well but I didn't push it much as I wanted to give the engine a once over first.

    As you can see the engine bay is a little dirty but it seems in order. There is red over-spray on the front a little as I think it's had the wings done (MK5 problem) and the bonnet has no stone chips at all
    It all looks straight though, no accident damage, Just a blow over. However whoever cleaned it must have used a brillo pad as I have never seen so many swirl marks on paintwork before! Not that it matters...

    So, Here we go again. I will update tomorrow with the plan of action. Engine has already been serviced and upgraded and I'm half way through stripping and selling the interior parts

    I must say a big thanks to Luke (Deako) with his help so far. He has answered all my questions and I'm sure it wont be the end of it
    This article was originally published in forum thread: MK5 Edition 30 #57 Track/Race Build, Massive Gearbox Update! started by mat-mk3 View original post
  • Recent Forum Posts


    MK2 GTI 8-20v Home build

    well after some parts turned up i got the rear brakes finished up and bled

    I ordered up a braided clutch line to replace the

    cupracraig Today, 12:58 Go to last post

    '89 Golf Mk2 TDi Build Thread

    That's how mine started! Originally just wanted a tidy up paint wise but ended up having the in and out painted red

    DN5 Today, 11:39 Go to last post
    Mal C

    MK2 dash lower infomation.

    think this is going to need a pic mate

    Mal C Today, 10:42 Go to last post

    Bleeding issues (mk4 calipers on a mk2)

    This comes up regularly, possibly should be a sticky.
    Rears off one at a time, up as high as the flexi allows, and the bleed nipple at the highest

    Tristan Today, 10:29 Go to last post

    Bleeding issues (mk4 calipers on a mk2)

    That is a possibility I guess - it's a 23mm so should be up to the job.

    I think I'm going to try bleeding the calipers off of the carriers

    jmsheahan Today, 10:22 Go to last post

    New race car: Mk3 Audi TTS

    Inside car GoPro mount sorted. Took a while to figure out as limited positions on a road car when you are not allowed suction mounts (msa regs), dont

    RobT Yesterday, 22:35 Go to last post
  • Upcoming Events

    March   2018
    Su Mo Tu We Th Fr Sa
    1 2 3
    4 5 6 7 8 9 10
    11 12 13 14 15 16 17
    18 19 20 21 22 23 24
    25 26 27 28 29 30 31