Diy Haldex controller........Haldex Controller taken apart with pics

Do you just want the motor? Or whole thing?

 

I'm happy to help where I can. I've got too many projects at the moment to take anything like this on fully, but I'll gladly help with giving advice on code or whatever. If you want to begin with the Arduino bits that I used, I could see if I can dig out the test code I wrote.

 

Thanks much appreciated

 

The whole unit please. Not the whole diff, just the Haldex unit.

 

Where would you like it sent to?

 

I'll PM my address.

I've also spoken to Trev, and he's sending me what code he already has.

 

Excellent

 

Is the L298N capable of controlling the motor or should we be using something like this? As maximum current is said to be 3A 2A continuous on the L298N this can cope with 30A and 14A continuous

http://www.ebay.co.uk/itm/Mini-Mons...1b1b8c7&pid=100005&rk=3&rkt=6&sd=192027844471

 

L298N should be fine.

 

I haven't succeeded in finding the test software I wrote all that time back. Looking back I should have put it on Github or something.

Worst case is that I can help and advise when you come to write software yourself, or I can help alongside.

 

Controller is in the car ready to bring with me Friday

 

Good to meet you today Alex show was good hope you have another couple of good days there!

Stand looked great

 

You too, thanks for the controller.
We only do the two trade days, so we're not there this weekend.

 

Fair enough, don't you get sales on public days? Or is it just to manic? And tyre kickers

 

We don't sell at the show, although we will take orders.
We use it to meet dealers, not end users, and they tend to be around on the trade day only.

 

Hello mr. sparrow
Hello to everybody

 

Dear friends, after indication from mr. sparrow I just joined the forum to give my contribution to drive the Haldex controller.
I made a total Haldex conversion on my MK3 GTI and I build my Haldex controller based on Arduino and with specific software

Will post something shortly.

Please be patient if I dont reply quickly because sometimes thing here are very busy

Also apologize me for my english but here we only talk pizza and mozzarella style

 

Here is a video of the testing phase of the controller. Low boost setting and only 30% torque on rear wheels:
https://drive.google.com/open?id=0B0v98rfDMyASNm03TWVjdFhLWXM

Here is a video of the controller while scrolling between the settings:
https://drive.google.com/open?id=0B0v98rfDMyASbHJjUE1TNVprZk0

The fluctuating oil temp reading was fixed yesterday


And here is the final installation in car:
https://drive.google.com/open?id=0B0v98rfDMyASbHc0ZVVtY3BkSDQ

Hope you enjoy

 

Looks a great setup you have built there

Any info would help on parts you used in the setup, unless you want to keep it a secret

 

No secrets just here to help