CE1 "R" ECU Power plug.

Discussion in 'Electrical' started by Spuey, Jul 9, 2018.

  1. Spuey Forum Member

    Joined:
    Nov 4, 2009
    Likes Received:
    2
    Can I utilise this plug as a power source for a '30' relay in an ABF conversion? or shall I bin and just get my permanent/switched live from the G and I positions?
     
  2. rubjonny

    rubjonny Administrator Staff Member Admin

    Joined:
    Oct 31, 2003
    Likes Received:
    3,298
    Location:
    Bracknell
    You can use this yes, feed G1/10 from ABF loom to R pin 2, feed R/1 with ignition live same as it was before so D/2 or D/7 and fit ecu relay 53 in slot 1. G1/7 pin is now unused.

    or bin off R plug and wire an ECU relay holder above the fusebox, earth pin 31, pin 86 to G spade 2 or 5 or D/2 or D/7, 30 to P spade, G1/10 to 87 and if using a 30 relay G1/7 to 86a
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice