I’m in need of help! I’ve recently done a polo 6n2 gti swap in my lupo. The car starts and runs. It’s got the polo engine and interior loom throughout the car. I believe most of the electrical bits work, however nothing on my clock dials work, no time, mileage, fuel, warning lights or illumination in general, etc. This is with the original lupo dials, so I bought some polo gti clocks and still the same issue. All fuses checked and wiring for breaks, both seem ok. Multimeter on the pin outs of the plugs on the back of the dials and getting power to them. Not sure what else to check for. Any advice would be greatly appreciated.